Recycled Crushed Asphalt Millings
for Daytona Beach Driveway Resurfacing

Serving Daytona Beach and Surrounding Areas

Asphalt millings are a budget reliable, ecologically friendly, driveway resurfacing option for homeowners that live near  Daytona Beach, FL.

We always inspect to ensure there are no water drainage concerns on the present driveway that need to be fixed to keep water from pooling in unwanted locations.

Low-Cost Stump Grinding at (386) 356-4687 can effectively excavate, grade, and level the driveway location so the water will run properly.

Below are some reasons a R.A.M (Recycled Asphalt Milling) driveway is one of the most cost reliable, clean, environmentally friendly, no upkeep resurfacing choices.

Crushed Asphalt Millings are a Much Cleaner More Stable Driveway Paving Option

Crushed asphalt driveway millings offer a cleaner option than gravel does. Plus they are a lot more budget-friendly choice than putting a concrete driveway.

Tamped recycled asphalt millings will likewise melt together rather in the Daytona Beach, FL sun.

This hot bright weather will harden the crushed asphalt causing it to become more powerful with age, instead of ending up being weaker like other driveway resurfacing choices.

This process will lead to a more solid driveway surface area than gravel can offer. Seniors using a wheelchair, cane, or walker require a more stable strolling surface area than a lot of gravel driveways can provide.

We use Only The Best Grade Recycled Asphalt Millings

If you are trying to find a stable surface area to walk on, gravel is not the choice due to the fact that it shifts and moves easily underfoot. There are a variety of types of gravel used to resurface a driveway.

These ranges of gravel have various quantities of clay in them, and some are not even real gravel they are just compressed clay. Gravel driveways produce a lot of dirt when it is windy and dry.

Mud puddles also form in gravel driveways throughout rainy weather. This damp gravel develops unsafe slippery conditions that can cause individuals to end up being and fall injured.

Choose Low-Cost Stump Grinding when you are searching for “asphalt millings near me,” because we are licensed and insured with over 10 years exeprience.

Crushed Recycled Asphalt Millings are an Environmentally Friendly Paving Alternative

Are you looking for an ecologically friendly green option for your driveway or car park resurfacing project?

Then long-lasting, environmentally friendly recycled crushed asphalt millings are an excellent choice.

Old asphalt is ground into great gravel size pieces, keeping it out of landfills. This also keeps the expense down, since they are recycled products being used for driveway paving.

Millings Driveways are the Best Choice for Maintenance Free Driveways

The fact that an asphalt millings driveway is likewise maintenance free, is another great reason for utilizing them to resurface your driveway. Florida Weather conditions do not negatively affect Recycled asphalt millings used for driveways, which is another good reason to have them set up in your driveway resurfacing project.

We Install Only The The Highest Grade Fine Asphalt Millings

Durability is key! We utilize the highest grade finely crushed driveway millings for your driveway. Then we tamp them down to create a surface area that will last a minimum of ten years! Call Low Expense Stump Grinding at (386) 356-4687 to get a TOTALLY FREE quote for your driveway resurface project.

Ready to discuss your new driveway made from recycled asphalt millings? Call the experts at 518-878-0627 

rv park parking spot resurfacing

asphalt millings install at an RV park in Bunnell

The Top Choice in Daytona Beach

Insured & Licened


Clean up after the job


Local Family Owned and Operated


Top Quality Equipment


Low Cost


Punctual and Friendly

We Follow Building And Construction Standards when Creating an Asphalt Millings Driveway

Low-Cost Stump Grinding follows new construction standards by installing the recycled crushed asphalt millings 6 inches deep to the roadway at the edge, and 4 inches deep where it meets the Garage.

Because we are licensed and insured with over ten years of experience building driveway millings, we maintain to date codes and existing laws for driveway resurfacing.

Low-Cost Stump Grinding Offers Alternatives for Your Crushed Recycled Asphalt Milling Job

Installing recycled asphalt millings on your driveway is a service we provide that can come with some additional options.

Many people pick to have Low-Cost Stump Grinding dig out about 5 to 6 inches of dirt throughout the whole space where the millings are going to be positioned.

Then we set up the driveway millings in this prepared area. When we dig this dirt out, we can get rid of the dirt or spread it in low areas around your landscape.

Some Daytona Beach Florida location house owners want the asphalt millings spread out straight on top of the ground rather than digging it out.

Low-Cost Stump Grinding will provide the specific resurfacing that you want. Tamping the asphalt millings once they are installed is typically chosen, so they stick together forming a much harder driveway surface area.

We can also apply glue over the tamped asphalt millings that will produce an extremely smooth driveway surface. When you are looking for a smooth surface area like concrete, choose the glue alternative.

Low Cost Stump Grinding uses Top of the Line Recycled Crushed Asphalt Milling Installation Equipment

We can likewise compact the asphalt driveway millings, with our vibrating tamping maker. At Low-Cost Stump Grinding, we use a much greater quality vibrating tamper than the majority of businesses that are just using a roller.

This kind of vibrating tamping equipment enables us to entirely tamp the whole asphalt milling surface area, condensing the crushed Recycled Millings together.

Another factor to call us at (386) 356-4687 or asphalt milling installation near Daytona Beach Florida locations, is because we use turf tires on our tractor. These special grass tires enable us to easily work the location, without causing any turf damage!

For the typical size driveway task Low-Cost Stump Grinding can normally deliver and install your driveway within a few hours.

Contact us today for a FREE estimate so you can see how cost-effective asphalt milling driveway resurfacing alternatives actually are.

Low-Cost Stump Grinding is licensed and insured with over 10 years of experience. Call us at (386) 356-4687 to get that driveway task dealt with, due to the fact that you and your family deserve the finest driveway surface at the most budget-friendly cost!

We Also Service the Following Areas:

Sanford | Oak Hill Deltona | Flagler Beach | Winter Park | Palm Coast | Orlando | Astor | Edgewater